Epoxy resin Woodresin 100 Ultra Premium 7.25 kg

Epoxy resin Woodresin 100 Ultra Premium 7.25 kg

The crystal-clear 100 Premium cast resin system is ideal for casting smaller river and ocean tables.

With small mixing volumes of less than 500 g, this epoxy resin can even be cast up to a height of 20 cm.

Technical Data

• Minimum pouring height: 1 cm
• Maximum pouring height: 5 cm
• Mixing ratio resin : hardener: 100 : 45
• Processing temperature: 20 °C
• Processing time at 20 °C: 2 - 4 hours
• Tack-free / next layer possible at 20 °C: 3 days
• Deformable after: 4 days
• Final strength: 8 days (After reaching final strength: intermediate sanding required for casting the next layer!)
• Heat-resistant up to: 60 °C
• Content: 7.25 kg
• Storage: dry, at 10-25 °C, without exposure to sunlight
• Storage stability: approx. 6 - 9 months in the sealed original container

Features and advantages

• The resin and hardener set comes in the correct mixing ratio of 100:45.
• The epoxy resin is UV-resistant and is suitable, for example, for the production of resin-wood lamps and small river tables or ocean tables.
• Suitable for colouring with up to a maximum of 10% colour paste, pigment or concentrate.Temperature-resistant up to 60 °C.
• Important: Potting volume and layer thickness are interdependent. The thicker the layer, the smaller the mixing volume must be!
• An ambient temperature above 20 °C can cause the mixture to boil and lead to boiling bubbles, stress cracks and discolouration!
• Not suitable for layer thicknesses of less than 1 cm.
• Processing instructions: The objects to be embedded must be clean and free of dust, oil and grease. The moisture content of the wood must be below 13%.