Wood Drill D 2 mm

ENT Wood Drill D 2 mm

Classic Version

The ENT wood drill impresses with its high-quality finish with a ground spiral. The drills can be used for hardwood and softwood, for glued and laminated boards, as well as for MDF and acrylic glass. The special cutting geometry ensures a clean cut through the wood fibres before drilling. The two spurs from drill diameter of 3 mm ensure a clean cut through the wood fibers before drilling a hole. The center point from a drill diameter of 3 mm guarantees precise drilling without "drifting" of the drill. The result: A good chip ejection, circular, accurate bore holes and a clean hole edge quality. The ENT drills can be used in a variety of machine types like corded and pillar drilling machines. They can also be used in combination with all ENT Wood Drill Sets.

Technical Data

• AØ: 2.0 mm
• NL: 21 mm
• GL: 48 mm

Features and advantages

• HSS quality, therefore extremely robust and resistant
• Optimum concentricity accuracy due to smooth, ground spiral
• Hardened HS-steel for high wear resistance and high heat resistance
• Suitable for hard and soft wood, glued wood, MDF and acrylic glass
• ATTENTION: ENT-drills with Ø smaller than 3mm do not have a centring tip!

Scope of delivery

• 5x wood twist drills (Ø 2.0 mm)
• in plastic tube

Downloads

Manufacturer