Unibase Adapter for Guide Bushes

Universal adapter plate for Guide Bushs

Allows the use of all TREND guide bushes(or all copying rings with 50 mm hole spacing for screwing on and 60 mm outer diameter).
Diameter of the plate 170 mm, thickness 8 mm

You know the problem: You would like to use your router with a certain copy sleeve, but unfortunately this size is not available for your router?

Use a UNIBASE adapter plate.

Screw the UNIBASE onto the base plate of your router and you can use the complete TREND Guide Bush range.

• This means that many copying jobs can be carried out with any router for which there is no standard guide bush
• Instructions: the UNIBASE is attached to the base plate of the router with two screws. Centered by means of a centering pin and the corresponding guide bush is screwed into the UNIBASE. 
• TREND Guide Bushis available from 7.8 to 40 mm

Technical Data

• Bosch GOF 1250 CE & LCE, GOF 1600 CE and GOF 2000 CE
• Bosch GKF 600 (-> TE 600) --> Adapter plate for TE 600
• Bosch POF 1400 ACE --> Adapter plate for POF 1400 ACE
• Festool OF 1010 --> Adapter plate for OF 1010
• Festool OF 1400 --> Adapter plate for OF 1400
• Festool OF 2200 --> no adapter plate available
• Triton JOF001 --> Adapter plate for JOF001
• Triton MOF001 and TRA001 --> Adapter plate for MOF001 & TRA001

Scope of delivery

• 1x UNIBASE adapter plate
• 1x centring aid
• 2x centring pins (1/4" or 1/2" and 8 or 12 mm)
• screw set

Manufacturer