You have searched for ""

In a set (4 pieces) | Roller-Ø: 27,5 mm

Gator Clamps CLAMP N VISE Mitre clamp | multifunctional, span width 9,5 cm

A: 30° l D: 28 mm l L1: 15.6 mm l L2: 20 mm l d: 10 mm l GL: 52 mm

Chamfer Routing Cutter HM with ball bearing | E: 30° l D: 27 mm l NL: 3.2 mm l GL: 44 mm l KL: 16 mm

D: 18 mm l NL: 14 mm l GL: 45 mm l Professional

L: 49.5 mm | B: 12 mm | S: 1.5 mm

D: 20 mm | NL: 35 mm | S: 8 mm | GL: 67 | Professional

D: 6.35 mm l NL: 12.7 mm l SL: 40 mm

Incl. micro fine adjustment - without parallel rods | for Trend T10 and T11 | --> for with Routinghole spacing 84/110 mm & bar Ø 8/10 mm

D: 45 mm | R: 2 mm l r: 4 mm l D: 12 mm l NL: 22 mm

For a flat grindstone | Fits all Tormek machines with universal support

E: 10° | D: 20 mm | NL: 14 mm | GL: 46 mm | KL: 16 mm

Round-/Chamfer Routing Cutter Corian Z2 | D: 49 mm | NL: 31 mm | R: 6.35 mm | GL: 102 mm | S: 12 mm | A: 12-°

Set the jig before sharpening | Measure existing angles

 E: 10° | D: 20 mm | NL: 14 mm | GL: 46 mm | KL: 16 mm

For drill diameters from 3 - 22 mm | Sharpens to a four-facet point

K=360 (Coarse) | Ø 250mm | For Tormek T-7 and T-8 

Replacement Planing knifes 82mm | for rebate planer TRPUL from Triton - 3 pcs

K=1200 (Extra Fine) | Ø 200mm | For Tormek T-3 and T-4

K=600 (Fine) | Ø 200mm | For Tormek T-3 and T-4

K=600 (Fine) | Ø 250mm | For Tormek T-7 and T-8

D: 22 mm | KL: 16 mm | NL: 9 mm | R: 3 mm | GL: 80 mm | S: 12 mm

D: 32 mm | KL: 16 mm | NL: 14 mm | R: 8 mm | GL: 85 mm | S: 12 mm 

Use the Tormek jig system directly on a bench grinder with a Wolverine Vee-Arm