MAFELL DuoDowler DDF40 MaxiMAX

MAFELL DuoDowler DDF40 MaxiMAX - a future-oriented innovation from Mafell.

With the "MaxiMAX" version, Mafell offers a complete system solution here. In addition to the actual DuoDowler, the T-MAX also includes wooden dowels, glue bottle, anti-slip mats and drill bits.

Technical Data

• Drilling depth: 0 - 40 mm
• Drill bit distance: 32 mm
• Tool holder Ø: 8 mm
• Maximum tool Ø: 12.2 mm
• Minimum tool Ø: 3 mm
• Swivel range: 0 - 90°
• Nominal idle speed: 8000 rpm
• Nominal power consumption: 900 W
• Suction connection Ø: 29 mm
• Weight: 2,8 kg
• Dimensions (WxLxH): 145 x 300 x 164 mm

Features and advantages

• With the DuoDowler DDF40, setting high-precision dowel holes becomes even easier and more efficient. It stands for an extremely wide range of applications, easy handling thanks to innovative ergonomics as well as absolutely form-fitting, stable connections
• Whether workshop or assembly: a higher connection quality cannot be achieved with a hand-held machine
• Whether outside corner, middle wall or hole line: the DDF40 not only enables the precision of a stationary machine, but also achieves this with standard roundwood dowels at a particularly low cost
• Thanks to the double-hole technology, extremely high stability is already guaranteed during installation
• The height of the swivelling stop can be set accurately to size up to 62 mm in height using the rotary wheel and scale. Common dimensions can be pre-set by means of the turret stop
• With the two spring-loaded stop pins in the base plate, holes can be drilled at a fixed distance of 15.5 mm from the edge of the workpiece: repeatable and without measuring and marking
• The ergonomically well thought-out motor housing with recessed grip at the front and grip hump at the back allows an ideal grip position and at the same time an optimal force transmission during every use
• The swivel stop is guided on both sides and centrally clamped with only one adjusting screw. For mitre joints it can be swivelled continuously from 0 to 90 degrees. Detent positions for 22.5°, 45° and 67.5° are predefined
• Perfect full equipment for hole line drilling, hardware drilling, in solid wood or panel materials
• Ideal for furniture and staircase construction in the workshop or on assembly
• No special wooden connectors required. Common and inexpensive round dowels are used
• Including T-MAX (transport case)

Scope of delivery

• 1x DuoDowler DDF40
• 1x additional support ZA
• 1x additional stop set ZAG
• 1x suction nozzle
• 1x position indicator PAZ
• 2x anti-slip mats (265x175mm)
• 1x glue bottle (250ml, empty)
• 1x Allen Key with handle
• 1x connection cable 4m
• 2x TC dowel drill Ø8mm
• 2x TC dowel drill Ø6mm
• 200x roundwood dowel 8x30
• 350x roundwood dowel 6x30
• 1x glue nozzle Ø8mm
• 1x side stop set SA320
• 1x strip stop LA
• 1x T-MAX

Video

Manufacturer