Festool Disk groove cutter HW D40x3,5

Festool disc grooving cutter TC D40x3.5

For OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000 and OF 2200.

The groove depth can be determined via 3 different milling spindles. Variant 1 without ball bearing is to be used with a rip fence, variant 2 with 16 mm ball bearing and variant 3 with a 28 mm ball bearing.

Technical Data

• D: 40 mm
• NL: 3.5 mm
• d: 6 mm

Features and advantages

• The carbide-tipped disc groove cutter is perfect for creating grooves for seals or also for parquet repair.
• The cutter can be changed quickly and easily via a screw on the cutter spindle.
• Carbide cutting edges.
• Different milling depths can be achieved with different milling spindles.
• Safe grooving on the face side with the milling discs from 1.5 mm to 5 mm milling width.
• The milling discs can be combined with the milling spindle without ball bearing or with ball bearing Ø 16 or 28 mm.

Note: You still need a suitable milling spindle: Millingspindle

Scope of delivery

• 1x Festool disc groove cutter HW D40x3.5

Manufacturer