Abrasives / sandpaper from Festool
For all Festool grinding devices, such as Festool Random orbital sanders or Festool Triangular Sander.
Garanat
High-performance abrasive for putties, fillers and paints. For working on the hardest substrates and the most modern paint systems. Suitable for the following materials:
- Paints and varnishes
- Putties
- Water-thinnable paints
- Especially recommended for VOC paints
- Plastics, mineral materials and acrylics
Brilliant 2
High-performance abrasive for paints and varnishes. For pre-, intermediate and final sanding in painting, carpentry, furniture and interior finishing. Suitable for the following materials:
- Paints and varnishes: acrylic, nitro, undercoat
- Putties, fine and polyester putties
- Thermoplastic and fiber-reinforced plastics
- Primers, fillers, protective lacquers
Kristal
High-performance abrasive for paints, varnishes and fillers. For coarse, quick pre-sanding for painters, car painters and automotive repair. Suitable for the following materials:
- Paints and varnishes
- Putties (polyester putties, 2K materials)
- Gypsum filler
Titan 2
High-performance abrasive for putties, fillers and paints. For pre-, intermediate- and final sanding at the car painter and at the car repair. Suitable for the following materials:
- Filler material, synthetic resin, nitro, thick film and combination filler, primer filler
- primers, reaction primersr
- 2K materials
- Water-thinnable paints
- Top coat sanding/matt sanding before repainting
- Ceramic paints
Rubin
High-performance abrasive for wood-based materials. Preliminary and intermediate sanding for carpenters, joiners, painters and for the wood and furniture industry. Suitable for the following materials:
- Hardwoods and softwoods
- Tropical woods
- Wood composites
- Varnishes, paints and nitro varnishes
- Old varnish layers, primed woods
Saphir
High performance abrasive for extreme duty. Sanding off thick coatings on hard substrates. Suitable for the following materials:
- Grinding of reinforced and fiber-reinforced plastics (GRP, CfK, etc.)
- Sanding of strongly hardened putties
- Sanding of heavily worn stair treads
- Fine grinding of rough, pre-rough metal surfaces
- Deburring, derusting and descaling
Diamant
High performance abrasive for finishing the hardest surfaces. For final sanding before painting. Suitable for the following materials:
- Matting and refining of hard surfaces such as scratch-resistant clearcoats
- Removal of overspray effects (spray mist)
- Filler
Platin 2
High performance abrasive for finish grinding of mineral materials, high gloss lacquers and plastics. Finish sanding for polishing preparation from grit 600. Suitable for the following materials:
- Solid surface materials such as Corian, Varicor, Cristalan
- Acrylic glass, Plexiglas
- PUR high-gloss coatings
- ceramic lacquers
- water-thinnable lacquers
Vlies
High performance abrasive for sanding, roughening, cleaning, degreasing and matting of wood materials, paints, lacquers and metals. Suitable for the following materials:
- Removal of oxidation from light metals
- Bright grinding of nonferrous and non-ferrous metals
- Bright grinding of soldered joints and transitions on welded joints
- Deep pore cleaning of natural woods, veneered and glazed surfaces
- Sanding of old lacquer layers before repainting
Granat Net
Mesh abrasive with high stock removal, long life and tear resistance for machining of high dusting materials:
- Filler
- Paints
- Varnishes
- General heavy dusting substrates
