Epoxy resin Woodresin 80 Ultra Premium 7 kg

Epoxy resin Woodresin 80 Ultra Premium 7 kg

The crystal-clear 80 Ultra Premium cast resin is ideal for scantlings and workpieces for woodturning or for moulding serving boards.

Once fully cured, it is excellent for woodturning and sanding.

Technical Data

• Minimum pouring height: 1 mm
• Maximum pouring height: 4 cm
• Mixing ratio resin : hardener: 100 : 45
• Processing temperature: 20 °C
• Processing time at 20 °C: 60 -90 min
• Tack-free / next layer possible at 20 °C: 10 hours
• Deformable after: 12 hours
• Final strength: 7 days (After reaching final strength: intermediate sanding required for casting the next layer!)
• Heat-resistant up to: 60 °C
• Content: 7 kg
• Storage: dry, at 10-25 °C, without exposure to sunlight
• Storage stability: approx. 6 - 9 months in the sealed original container

Features and advantages

• The resin and hardener set comes in the correct mixing ratio of 100:40.
• The epoxy resin is UV-resistant and is suitable, for example, for the production of scantlings for woodturning or snack and serving boards.
• Suitable for colouring with up to a maximum of 10% colour paste, pigment or concentrate.Temperature-resistant up to 70 °C.
• Important: Potting volume and layer thickness are interdependent. The thicker the layer, the smaller the mixing volume must be!
• An ambient temperature above 20 °C can cause the mixture to boil and lead to boiling bubbles, stress cracks and discolouration!
• For scantlings with a layer thickness of 1 mm - 4 cm, the maximum casting volume is 250 g.
• For cutting boards with a layer thickness of 1 mm - 2.8 cm, the maximum casting volume is 2.8 kg for a layer thickness of 2.8 cm and 10 kg for a layer thickness of 1 cm.
• Processing instructions: The objects to be embedded must be clean and free of dust, oil and grease. The moisture content of the wood must be below 13%.