Pivoting Router Lift OFL3.0K

Pivoting Router Lift OFL3.0K for your Router Table

For all those who already use a Kreg inlay plate and want to change to an OFL!

The first and only one of its kind - pivoting lift from -5 to 50 degrees

The OFL3.0K - the variant in the Kreg insert plate format - for router motors with 43 mm clamping neck including swivel mechanism that only professional tables use. Solid and great workmanship. Ideal for small workshops or, due to short set-up and configuration times, also ideal next to the large spindle moulder -Genuinely Made in Germany!

Why this router lift?

• Pivots from -5° to 50°
• Classic snap-in points 22.5°, 30°, 45° and 90°
• No Routing Depthloss!
• Easiest cutter change thanks to upward looking spindle and collet chuck!
• Innumerable routing possibilities - grooves, Rebating, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!

Simple operation of the router lift

• Height adjustment via rotary handle above.
• Angle locking via a lever below.
• Centering in the slotted hole by means of two levers also below.
• Here we go.

Directly compatible and approved milling motors:

• AMB (Kress): 530 FM, 800 FME, 1050 FME
• MAFELL: FM 800, FM 1000
• SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
  • If your motor is not listed, please check the tolerances of the clamping neck for your model as specified by the manufacturer or contact us.
• MAFELL FM1650PV-LO not compatable

-----------------------------------------------------------------------------------------

Optional accessories:

• Height gauge: High-quality, magnetic setting gauge for tool-free operation with scale (Art. No. SA-99600004)
• Mounting kit: 20-piece mounting kit with 4x corner plates, 4x countersunk screws and 12x wood screws (Item No. SA-99600005)
• Levelling frame: Sheet steel frame for plate levelling (Art.No. SA-99600006)
• Digital measuring instrument: Digital height measuring instrument for 1/1000mm accurate Routing Depth adjustment (Part No. WX-WR525)
• Milling fence with protective shield: Arched or freemilling kit for Routing without rip fence (Art. No. SA-RTS-KIT)
• Compensation pieces for -Precision insert Router Tableplate: four Insert plate compensation pieces for Kreg insert plates PRS4034 / PRS 4038 (Art.No. KR-PRS3040)

Technical Data

• Dimension insert plate: 298 x 235 x 9 mm
• Corner radius Insert plate: 19.05 mm (3/4")
• Height adjustment travel/rotation: 4 mm
• Max. Adjustment travel: 101 mm
• Height milling lift (max. extended): 240mm
• Max. Cutter diameter: 55 mm
• Weight: approx. 5 kg

Features and advantages

• Quality from Germany
  High quality, solid construction. Construction of high quality aluminium and steel.
• Fine height adjustment to 1/10mm
  Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw.
• Smooth-running spindle columns
  Enable a stepless and exact fine height adjustment.
• Compatible to common Routing
  The OFL3.0K is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
• Safe Routing for any diameter
  The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated!
• Assembly made easy
  Simple mounting of the milling cutter to the mounting adapter.
• Routing also without rip fence
  2 drill holes for the fence pin allow you to free e.g. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes).
• Absolutely flat
  Simple levelling of the OFL3.0K by means of levelling screws in the insertion plate. Optionally a frame for a permanent level adjustment can be purchased.
• No own drillings necessary
  Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
• Lasered scaling
  Millimeter scaling on the surface for exact alignment of the rip fence.
• Additional recessed grip for easy changing of the reduction plates.
• Magnetism for mounting additional accessories is distributed over the entire reduction plate.

Scope of delivery

• 1x Pivoting Router Lift OFL3.0K
• 2x reduction plates long hole Ø 16 and 32
• 1x reducing plate Ø 68 mm
• 1x hexagon screwdriver 5x150 mm
• 1x instruction manual (German)

Video

Downloads