Wood Drill Set D 1-13 mm - 25 pieces

ENT Wood Drill Set D 1-13 mm

with ground spiral

The ENT wood drill sets sets are the perfect sets for drilling bore holes in softwood, hardwood, glued and coated boards as well as many other types of wood such as MDF. Because of the manufacturing of a very resistant high-speed steel, the drills have a good durability even after many drilling operations. The ground spiral ensures a smooth chip ejection. With their cylindrical shank, the drills can be used in all common types of drilling machines. With the intermediate sizes in half millimeter increments, you always have the right drill at hand, also for less common drill hole sizes. And of course from the smallest to the largest diameter. The sturdy quality packaging protects the drills against damage. Due to the clearly arranged drills, you have the full assortment ready at any time. In addition, the packaging is ready for easy transport and hanging on a tool wall.

Technical Data

• 25 twist drills with diameters from 1 to 13 mm in 0.5 mm steps
• Steel quality: High-speed steel (HS) according to EN ISO 4957
• Hardness of the material: approx. 62 HRC
• Machine types: (Cordless) Hand drills, bench and upright drills
• Speed: 2400 rpm (Ø 13 mm) to 8000 rpm (Ø 1 mm)

Features and advantages

• HSS-G quality, therefore extremely robust and resistant
• Optimum concentricity accuracy due to smooth, ground spiral
• Centring tips guarantee precise spot drilling without the drill running out of true
• Hardened HS-steel for high wear resistance and high heat resistance
• Suitable for hard and soft wood, glued woods, MDF and acrylic glass
• Many application possibilities due to intermediate sizes in half millimeter steps
• Shockproof, high-quality plastic box for opening with practical locking and hanging system
• ATTENTION: ENT drills with a Ø of less than 3 mm do not have a centre point!

Scope of delivery

• 1x ENT wood drill set (25 pieces) in plastic box

Downloads