Dovetail Jig FD300

IGM Dovetail Jig FD300 

For creating semi-covered / open dovetail and box joints

The Dovetail jig from IGM is a very high-quality and stable construction made of steel. Suitable for workpiece thicknesses of 11 to 25 mm, this system is suitable for both professionals as well as any do-it-yourselfer.

Technical Data

• Workpiece thicknesses: 11 - 25 mm
• Workpiece widths: up to 305 mm
• Operating tool: included in the scope of delivery
• Guide bush 15.8 mm: Outer diameter 60 mm with 2 mounting holes 50 mm apart
• Max. Diameter of the router base: 180 mm

Features and advantages

• Precise laser-cut template made from 4 mm galvanised sheet steel.
• Easy to assemble and handle.
• Routing bit for semi-concealed dovetail tines included in the scope of delivery.
• Can be used with all standard routers (a small, handy router with 500 - 1000 W power is recommended)
• Various templates are optionally available Important! The necessary guide bush / guide bush is automatically supplied with each template, unless the same guide bush is used that is supplied with the basic equipment.
• Incl. matching steel copy ring 15.8mm
  • Outer diameter 60 mm with 2 fixing holes 50 mm apart, measured from hole centre to hole centre. This type of guide bush fits on many Perles, Elu, Metabo, Felisatti and all TREND routers. For other makes, you may need an adapter plate. These are available as router-specific adapter plate or as universal adapter plate to be able to use the corresponding guide bushes.

Scope of delivery

• Base unit FD 300
• Template for semi-concealed dovetail tines 12.7 mm
• Guide bush 15.8 mm
• Dovetail cutter I-M118-12781
• Operating tool
• Instructions

Video

Downloads

Manufacturer