DIA® PERFORMANCE roughing cutter D 8mm, B 22 mm

DIA® PERFORMANCE roughing cutter - right-hand twist, Z=3

Roughing cutter with three spiral fluted solid carbide cutting edges with roughing teeth. Basic and peripheral cutting, cylindrical throughout. Right-hand rotation/right-hand twist. Mechanical feed. 

Suitable for pre-milling and cutting solid wood and panel materials. With good workpiece clamping, the good side of the workpiece is at the bottom. Optimum chip removal upwards. 

DIA® PERFORMANCE - Innovation:

• An innovative, friction-avoiding, high-performance diamond coating.
• After lapping the flutes and/or cutting edges, a DIA® PERFORMANCE coating (Diamond-like Carbon) of less than 1 micron (0.001 mm) is applied.

Technical Data

• D: 8 mm
• B: 22 mm
• L: 80 mm
• S: 8 mm
• Hardness grade: HV0.025: 2500-3100

Features and advantages

• Tool life 4-5 x higher than solid carbide.
• Right-hand twist for clean groove base.
• Spiral cutting edges upwards for fast cutting.
• Excellent end milling results.
• Better chip clearance.
• Low coefficient of friction for low working temperature.
• Machining of aluminium and plastic materials without lubricant.

Excellent results with:

• Hardwood and softwood
• Minerals (CORIAN ...)
• Plastics (acrylic materials, Plexiglas, HDPE)
• Composite materials (HPL, AluDibond, Trespa ...)