Amana Tool Sprial Groove Cutter VHM Ø6 S6 RD

Amana Tool Spiral flute cutter VHM Ø6 S6 RD

Spiral flute cutters combine a shearing action during cutting with a worm action during chip removal. The shearing action ensures a particularly clean, precise cut, while the worm action removes the chips from the cut.

The 'Up-Cut' cuts from the bottom up and pulls the chips from the bottom up, allowing deeper penetration with less stress on the tool. An excellent choice for mortising.

A special, unique carbide grade with increased flank geometry and razor-sharp cutting edges with polished flutes provides an excellent finish and longer tool life, especially with abrasive materials. Excellent for making grooves and flute cuts in chipboard, plywood and laminate. Used mainly on CNC machines and other automatic routers. Can be used with hand-held and table-mounted portable routers. Excellent for cutting:

• Laminate
• Melamine
• Melamine chipboard
• MDF
• Veneered plywood
• Wood

Our Spektra™ bits feature a nACo® nanocomposite coating with extreme nano-hardness and heat resistance. With a brilliant, distinctly tinted colour, nACo offers additional improvements in four critical aspects of router tools.

Technical Data

• D: 6 mm
• NL: 19 mm
• GL: 63 mm
• S: 6 mm
• Z: 2
• right-hand twist

Features and advantages

• The nACo coating is a micro-thin ceramic coating that ensures that the cutting edge of the tool retains crucial sharpness and lubricity. This ensures durability and produces cutting results of the highest quality.
• The coating prevents high heat and oxidation that affect the performance of the cutting tools.
• Multi-coloured shades, while attractive, disappear with use and the coating still remains fully effective.
• nACo provides approximately 4,500 Vickers for impressive hardness in the cutting areas of the tool, up to 2.5 times higher than uncoated cutters.

Scope of delivery

• 1x Amana Tool Sprial Groove Cutter VHM Ø6 S6 RD

Manufacturer